DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is intended to detect conditions where both the accelerator pedal and brake pedal were depressed at the same time. When this condition occurs, the accelerator pedal position is defaults to idle. If the DTC occurs when both pedals are NOT depressed, this may indicate that either the accelerator pedal position or brake pedal position are NOT returning to 0%.

DTC	CONSULT screen terms (Trouble diagnosis content)	DTC detection condition
P2299-00	ACCEL PEDAL POS BRAKE SWITCH	Diagnosis condition	This diagnostic runs when the vehicle is in motion.
		Signal (terminal)	Accelerator Pedal Position Sensor and Brake Pedal Position Sensor.
		Threshold	ECM detected the brake pedal is depressed when the throttle position sensor > 8% with < 2% deviation for 2 seconds.
		Diagnosis delay time	-