Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR CURRENT DTC
1. Turn ignition switch ON.
2. Connect CONSULT and check for "ENGINE" diagnostic trouble codes.
3. Check for DTC P2280-00 being current on the CONSULT screen.
Is applicable DTC detected?

YES

GO TO 2 .

NO

Refer to Intermittent Incident .
INSPECT AIR FILTER
1. Remove the air filter.
2. Inspect the air filter for any damage or restriction.
Is the air filter damaged or restricted?

YES
- Replace the damaged or restricted air filter. Refer to Removal and Installation .
- GO TO 3 .
NO

GO TO 3 .
ERASE CURRENT DTC
1. Connect all components.
2. Turn ignition switch ON.
3. Using CONSULT, erase "ENGINE" diagnostic trouble codes.
4. Operate the engine within the "Conditions for setting the DTC".
5. Using CONSULT, check for "ENGINE" diagnostic trouble codes.
Is P2280-00 DTC current?

YES

Return to Diagnosis Procedure. Refer to DTC Description .

NO

Repair complete.