DTC Detection Logic
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
The turbocharger Rotary Turbine Control Valve actuator position feedback is failed in range, but not clearly "in range high" or "in range low."
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P226C-00 |
RTCV ACTUATOR POS RTCV ACTUATOR POS CMD RTV INSTALL/CALIB STATUS RTCV HYSTERESIS STATUS |
Diagnosis condition |
When the key switch is in the ON position. |
|
Signal (terminal) |
Rotary Turbine Control Valve Actuator signal. |
||
|
Threshold |
The Engine Control Module (ECM) detected the difference between actual and commanded turbocharger position is too large. |
||
|
Diagnosis delay time |
- |
||