DTC Detection Logic
WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.
The turbine bypass valve smart device actuator has determined itself to be incapable of meeting its desired position. This is communicated to the ECM via a number of status codes.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P2262-00 |
RTCV ACTUATOR POS RTCV ACTUATOR POS CMD |
Diagnosis condition |
This diagnostic runs continuously when the key switch is in the ON position. |
|
Signal (terminal) |
Rotary Turbine Control Valve Actuator. |
||
|
Threshold |
The Rotary Turbine Control (RTC) actuator position could not meet the commanded position for greater than 10 seconds. |
||
|
Diagnosis delay time |
- |
||