LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Engine Control System (DTC/Circuit Diagnosis) (CUMMINS 5.0L) (5 Of 6)) >> DTC/Circuit Diagnosis >> DTC P225C-00: After Treatment Intake Oxygen Sensor High >> DTC Description >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2018 Nissan Titan XD. However, it is still accessible from the selected car via links, so may be relevant.

The Engine Control Module (ECM) detected a mismatch between the after treatment intake and outlet NOx sensor readings.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P225C-00

NOx Sensor Bank 1 Sensor 1 Sensor Circuit Drifted High.

INTAKE NOX

INTAKE NOX CORRCTD

INTAKE NOX READING STBL

OUTLET NOX

OUTLET NOX CORRCTD

OUTLET NOX READING STBL

Diagnosis condition

Continuously while the ignition is ON or when the engine is running

Signal (terminal)

-

Threshold

The absolute difference between the inlet and outlet NOx sensors was greater than a calibrated threshold

Diagnosis delay time

Diagnostic runs continuously when the engine is running