Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.
- Activate and display TPMS sensor IDs
- Display tire pressure reported by the TPMS sensor
- Read TPMS DTCs
- Register TPMS sensor IDs
- TIRE PRESSURE MONITORING SYSTEM CONFIGURATION
Perform configuration. Refer to Work Procedure .
GO TO 2 .
- TIRE PRESSURE SENSOR ID REGISTRATION
Perform tire pressure sensor ID registration. Refer to Work Procedure .
Does low tire pressure warning lamp turn OFF?
YES
Inspection End.
NO
Perform configuration of TPMS again. Refer to Work Procedure .