Component Function Check
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- COMBINATION METER INPUT SIGNAL
CONSULT
- Select "Data Monitor" mode of "METER/M&A".
- Select "PKB SW".
- Check that the function operates normally according to the following conditions:
Monitor item
Condition
Status
PKB SW
When parking brake is applied
ON
When parking brake is released
OFF
Is the inspection result normal?
YES
Inspection End.
NO
Refer to Diagnosis Procedure .