Diagnosis Procedure
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK PARKING BRAKE SWITCH CIRCUIT
- Disconnect combination meter harness connector M24 (with Type A meter), or M163 (with Type B meter), and parking brake switch harness connector E160.
- Check continuity between combination meter harness connector M24 (with Type A meter), or M163 (with Type B meter), terminal 26 and parking brake switch harness connector E160 terminal 1.
Combination meter
Parking brake switch
Continuity
Connector
Terminal
Connector
Terminal
M24 (with Type A meter)
M163 (with Type B meter)
26
E160
1
Yes
- Check continuity between combination meter harness connector M24 (with Type A meter), or M163 (with Type B meter), terminal 26 and ground.
Combination meter
Ground
Continuity
Connector
Terminal
M24 (with Type A meter)
M163 (with Type B meter)
26
No
Is the inspection result normal?
YES
Inspection End.
NO
Repair or replace harness or connector.