LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Warning Chime System) >> Symptom Diagnosis >> The Parking Brake Release Warning Continues Sounding, Or Does Not Sound >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK PARKING BRAKE WARNING LAMP 
    1. Start the engine.
    2. Check the operation of the brake warning lamp by operating the parking brake.

      Condition

      Warning lamp status

      Parking brake applied

      ON

      Parking brake released

      OFF

    Is the inspection result normal?

    YES

    Replace the combination meter. Refer to Removal and Installation (with Type A meter), or Removal and Installation (with Type B meter).

    NO

    GO TO 2.

  2. CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT 

    Check the parking brake switch signal circuit. Refer to Diagnosis Procedure .

    Is the inspection result normal?

    YES

    GO TO 3 .

    NO

    Repair or replace harness or connector.

  3. CHECK PARKING BRAKE SWITCH UNIT 

    Check the parking brake switch. Refer to Component Inspection .

    Is the inspection result normal?

    YES

    Replace the combination meter. Refer to Removal and Installation (with Type A meter), or Removal and Installation (with Type B meter).

    NO

    Replace the parking brake switch. Refer to Removal and Installation .