Component Function Check
WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK BATTERY SAVER OUTPUT/POWER SUPPLY FUNCTION
CONSULT
- Turn ignition switch ON.
- Turn interior room lamp ON.
- Front room/map lamp assembly (with front roof console) (if equipped)
- Front room/map lamp assembly (without front roof console) (if equipped)
- Personal lamp
- Select "Battery Saver" in "Active Test" mode of "BCM".
- While operating the test item, check that interior room lamp turns ON/OFF.
OFF
: Interior room lamp ON
ON
: Interior room lamp OFF
Is the inspection result normal?
YES
Battery saver output/power supply circuit is normal.
NO
Refer to Diagnosis Procedure .