LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 176 (Parking Brake System) >> Removal And Installation >> Parking Brake Rear Cable >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen adjusting nut.
    NOTE: It is not necessary to remove parking brake front cable.
  2. Remove spring (3) from equalizer (1).
    GNSALFIA0613Z-613Courtesy of NISSAN NORTH AMERICA, INC.
  3. Pull equalizer (1) on parking brake front cable (2) and separate parking brake rear cable [LH/RH (4)] from parking brake front cable.
    CAUTION: To prevent damage to parts, do not bend parking brake cables.
  4. Separate parking brake rear cable from toggle lever. Refer to Exploded View .
  5. Remove nuts and bolts from rear parking brake cable.
  6. Remove parking brake rear cable.