LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Rear Final Drive: Ma241 (Eld)) >> Rear Final Drive: Ma241 (Eld) >> Removal And Installation >> Differential Lock Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery or batteries. Refer to Battery Disconnect .
  2. Remove jack and tools.
  3. Remove upper bracket of center seat belt retractor and belt assembly. Refer to Exploded View .
  4. Reposition rear panel out of the way. Refer to Removal and Installation .
  5. Reposition the carpet to access differential lock control unit to disconnect harness connector.
  6. Remove the nuts (B) disconnect the harness connector (A) from the differential lock control unit (1) and remove differential lock control unit (1).
    GNSDB117859Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL

    : Front