LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Brake System) >> Removal And Installation >> Front Disc Brake >> Brake Caliper Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cap from the reservoir tank.
  2. Remove the wheel and tire using power tool. Refer to Removal and Installation .
  3. Secure the disc rotor using wheel nuts.
  4. Remove brake hose from the brake caliper. Discard the copper sealing washers. Refer to Exploded View .
    CAUTION: Do not reuse copper sealing washers.
  5. Remove torque member bolts and remove brake caliper and torque member from the vehicle as an assembly.
    CAUTION: Do not drop brake pad and brake caliper assembly.
  6. Remove brake pads and retainers from brake caliper assembly.
scientia non olet · About LEMON Manuals