LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Front Suspension) >> Removal And Installation >> Upper Link >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel and tire using power tool. Refer to Removal and Installation .
  2. For Non-XD Models remove the front fender protector. Refer to Removal and Installation - Front Fender Protector .
  3. Support the lower link using a suitable jack.
    WARNING: Place a suitable jack under the lower link.
    CAUTION: Do not damage the lower link with the suitable jack.
  4. Remove the nut and remove the brake hose block from the steering knuckle. Refer to Exploded View .
  5. Remove the cotter pin and the nut from the upper link ball joint.
    CAUTION: Do not reuse the cotter pin.
  6. Separate the upper link ball joint stud from the steering knuckle using suitable tool.
  7. Remove the upper link bolts and nuts. Remove the upper link.
    CAUTION: Do not reuse the upper link nuts.
scientia non olet · About LEMON Manuals