Oil Level

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Check oil level (A) from filler plug hole as shown in the figure after removing filler plug (1) and gasket from final drive assembly.

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Turn the ignition switch OFF while checking oil level.
- Oil level should be level with bottom of filler plug hole.
Set a gasket on filler plug and install it on final drive assembly.
CAUTION: Do not reuse gasket.
Tighten filler plug to the specified torque. Refer to Exploded View .