User Mode

In USER MODE, air bag warning lamp on combination meter blinks when a malfunction is detected and warns the customer (driver).

How to Read Air Bag Warning Lamp 

1. Turn the ignition switch from OFF to ON, and check that the air bag warning lamp blinks.
2. Compare the air bag warning lamp blinking pattern with the examples.

Air Bag Warning Lamp Examples 

Air bag warning lamp operation (user mode)	SRS condition	Reference item
Courtesy of NISSAN NORTH AMERICA, INC.	No malfunction is detected No further action is necessary	Change to Diagnosis mode is not possible when the system is normal
Courtesy of NISSAN NORTH AMERICA, INC.	Air bag diagnosis sensor unit is malfunctioning Each sensor is malfunctioning Each module is malfunctioning Occupant system is malfunctioning	Refer to DIAGNOSIS MODE
	Zero point reset not yet performed	Refer to Special Repair Requirement
Courtesy of NISSAN NORTH AMERICA, INC.	Air bag is deployed Seat belt pre-tensioner is deployed	Refer to For Frontal Collision or For Side and Rollover Collision
	Air bag diagnosis sensor unit is malfunctioning Air bag power supply circuit is malfunctioning Air bag warning lamp circuit is malfunctioning	Refer to Diagnosis Procedure
	Battery voltage is low (less than 9 V) Battery voltage is high (more than 16 V)	Refer to How to Handle Battery
Courtesy of NISSAN NORTH AMERICA, INC.	Air bag diagnosis sensor unit is malfunctioning Air bag warning lamp circuit is malfunctioning	Refer to Air Bag Warning Lamp Does Not Turn On

Occurrence of Intermittent Malfunction 

Air bag warning lamp blinks in user mode when an intermittent malfunction occurs. Air bag warning lamp turns OFF when system returns to normal status.

Battery Low Voltage Detection 

Air bag diagnosis sensor unit warns the driver by turning air bag warning lamp ON when air bag diagnosis sensor unit detects battery low voltage. Air bag warning lamp turns ON when a voltage value at which air bag diagnosis sensor unit cannot operate normally (9 V or less) is detected. After starting to turn ON, air bag warning lamp turns OFF when air bag diagnosis sensor unit detects the normal value of battery voltage.

The mode cannot be switched to diagnosis mode by ignition switch while air bag warning lamp turns ON due to this cause.

Battery High Voltage Detection 

Air bag diagnosis sensor unit warns the driver by turning air bag warning lamp ON when air bag diagnosis sensor unit detects battery low voltage. Air bag warning lamp turns ON when a voltage value at which air bag diagnosis sensor unit cannot operate normally (16 V or more) is detected. After starting to turn ON, air bag warning lamp turns OFF when air bag diagnosis sensor unit detects the normal value of battery voltage.

The mode cannot be switched to diagnosis mode by ignition switch while air bag warning lamp turns ON due to this cause.