Special Repair Requirement

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ZERO POINT RESET
CONSULT
1. Perform "Zero point reset".
  NOTE:
  When performing "Zero point reset", be careful of the items described as per the following:
  - Perform "Zero point reset" after installing passenger seat to the vehicle.
  - Do not put any objects on passenger seat.
  - Do not apply excessive vibration to the vehicle.
  - Do not touch the vehicle during zero point reset.
  - Do not tilt vehicle.
2. Select "Start" on "Zero point reset function" from "Work support" of "OCCUPANT DETECTION".
3. "Zero point reset function" starts.
GO TO 2 .
CONFIRMATION OF SETTING
1. Proceed to "Zero point reset function" screen from "Work support" of CONSULT "OCCUPANT DETECTION".
2. Check that "Complete" or "Incomplete" is displayed on "Zero point reset status".
CAUTION:
- "Complete" is displayed on "Zero point reset current status" if the seat is reinstalled by seat removal and installation, or "Zero point reset" is already performed.
- "Zero point reset current status" displays "Incomplete" if a new seat is installed. When turning ignition ON without performing "Zero point reset", front passenger air bag OFF indicator turns ON. When "Zero point reset" is performed, front passenger air bag OFF indicator turns OFF.
Is zero point reset status "complete"?

YES

Print out "Zero point reset current status" screen. Inspection end.

NO

Recheck the preliminary check items and perform zero point reset again.