LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Steering System) >> Removal And Installation >> Power Steering Oil Pump >> Removal and Installation - Cummins 5.0 >> Removal

Removal and Installation - Cummins 5.0: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not reuse drained power steering fluid.
  1. Remove upper air cleaner case. Refer to Removal and Installation .
  2. Remove drive belt. Refer to Removal and Installation - Drive Belt .
  3. Disconnect air inlet hose on air inlet tube at engine. Set air inlet tube aside. Refer to Exploded View .
  4. Disconnect power steering suction hose from power steering oil pump.
  5. Remove eye bolt and disconnect power steering pressure line from power steering oil pump. Plug lines and discard copper sealing washers.
    CAUTION: Do not reuse copper sealing washers.
  6. Remove bolts and power steering pump.
  7. Remove power steering pump mounting bracket from engine, if necessary.
scientia non olet · About LEMON Manuals