LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Steering System) >> Basic Inspection >> Steering Wheel >> Inspection >> Neutral Position Of Steering Wheel

Neutral Position Of Steering Wheel

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check neutral position of steering wheel after confirming that front wheel alignment is correct. Refer to Inspection .
  2. Turn tires straight ahead. Check if steering wheel is in the neutral position.
    • If it is not in the neutral position, remove steering wheel and reinstall it correctly. Refer to Removal and Installation .
    • If the neutral position cannot be attained by repositioning steering wheel two teeth or less on steering stem, loosen tie-rod lock nuts of steering sockets, then adjust tie-rods by the same amount in the opposite direction. Retorque lock nuts to specification. Refer to Exploded View  (XD Models) or Exploded View  (Non-XD Models).
      CAUTION: Check wheel alignment after the adjustment. Refer to Inspection .