Component Inspection (Stop Lamp Switch)
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK STOP LAMP SWITCH
- Turn ignition switch OFF.
- Disconnect stop lamp switch connector.
- Check continuity between stop lamp switch terminals.
Stop lamp switch
Condition
Continuity
Terminals
1
2
Brake pedal
Not depressed
No
Depressed
Yes
Is the inspection result normal?
YES
Inspection End.
NO
Replace stop lamp switch. Refer to Exploded View .