LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B2601: Shift Position >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 

    SYMBOL CONSULT

    1. Shift the selector lever to the P (Park) position.
    2. Turn ignition switch ON and wait 2 seconds or more.
    3. Shift the selector lever to any position other than P (Park) and wait 2 seconds or more.
    4. Select "Self Diagnostic Result" mode of "BCM".
    5. Check DTC.

    Is DTC detected?

    YES

    Go to Diagnosis Procedure .

    NO

    Inspection End.

scientia non olet · About LEMON Manuals