LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 125 (Engine Mechanical (5.6L)) >> Removal And Installation >> Air Cleaner And Air Duct >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine cover. Refer to Exploded View .
  2. Disconnect mass air flow sensor harness connector.
  3. Remove air cleaner case (upper) and mass air flow sensor assembly and air duct by disconnecting their joints.
    • Add matching marks, if necessary for easier installation.
  4. Remove mass air flow sensor from air cleaner case (upper) (if necessary).
    CAUTION: Handle mass air flow sensor according to the following instructions.
    • Do not impact it.
    • Do not disassemble it.
    • Do not touch its sensor.
  5. Disconnect clips (B) from air duct.
    GNSALBIA2969Z-969Courtesy of NISSAN NORTH AMERICA, INC.
  6. Remove clamps (A) and disconnect PCV hose [bank 1 (2)] and PCV hose [bank 2 (1)] from air duct.
  7. Remove air duct.
  8. Remove air cleaner filter.
  9. Remove air cleaner case (lower).
  10. Remove adapter.
scientia non olet · About LEMON Manuals