LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2021 >> NV2500 HD S >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Exterior) >> Removal And Installation >> Front Bumper >> Removal and Installation - Bumper Fascia Upper >> Removal

Removal and Installation - Bumper Fascia Upper: Removal

WARNING: This page is about a different car, the 2018 Nissan Titan XD and 2018 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front grille. Refer to Removal and Installation .
  2. Remove active grille shutter (for Non-XD Models). Refer to Removal and Installation .
  3. Partially remove front overfender [LH/RH (if equipped)]. Refer to Removal and Installation .
  4. Partially remove fender protector (LH/RH). Refer to Exploded View - Front Fender Protector .
  5. Remove bumper fascia upper screws.
  6. Release clips and remove bumper fascia upper.
scientia non olet · About LEMON Manuals