DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM SELF DIAGNOSTIC RESULT
With CONSULT
- Turn ignition switch ON.
- Select "Self Diagnostic Result" mode in "AIR PRESSURE MONITOR" of "BCM".
- Check DTC.
Is DTC "C1770", "C1771", "C1772", or "C1773" detected?
YES
Proceed to Diagnosis Procedure .
NO
Prior to repair: Refer to Intermittent Incident .
NO
Confirmation after repair: Inspection End.