Diagnosis Procedure

The warning is still displayed even after washer fluid is added.
The warning is not displayed even though the washer tank is empty.

CHECK WASHER FLUID LEVEL SWITCH
Perform a unit check for the washer fluid level switch. Refer to Component Inspection .

Is the inspection result normal?

YES

GO TO 2.

NO

Replace washer level switch.
CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT
Check the washer fluid level switch signal circuit. Refer to Diagnosis Procedure .

Is the inspection result normal?

YES

Replace combination meter. Refer to Removal and Installation .

NO

Repair harness or connector.