LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission (Re0F10D) (DTC/Circuit Diagnosis)) >> DTC Diagnosis >> Transmission (TCM) >> DTC P0742: Torque Converter >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
CAUTION: Always drive vehicle at a safe speed.
  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" is previously conducted, always turn ignition switch OFF and wait at least 10 seconds before performing the next test.

    GO TO 2.

  2. CHECK DTC DETECTION 
    1. Start the engine.
    2. Maintain the following conditions for 5 seconds or more.
      CAUTION: Always drive at a safe speed.

      Shift position

      : "D" position

      Accelerator pedal position

      : 1.0/8 or more

      Vehicle speed

      : 1 - 15 km/h (0.6 - 9 MPH)

      Brake pedal

      : Depress*

      *: Keep depressing the brake pedal moderately not to accelrate the vehicle.

    3. Check the first trip DTC.

    Is "P0742" detected?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals