DTC Confirmation Procedure

With CONSULT 

1. Perform tire pressure sensor ID registration. Refer to WORK PROCEDURE .
2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes.
   NOTE:

   Avoid driving in areas with radio interference.

3. Select "Self Diagnostic Result" mode in "AIR PRESSURE MONITOR".
4. Check DTC.

Is DTC C1708, C1709, C1710, or C1711 detected?

YES 

Proceed to DIAGNOSIS PROCEDURE .

NO 

Inspection End.