LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Rogue S, AWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Power Supply, Ground & Circuit Elements (Except Hybrid) >> Removal And Installation >> Battery >> Removal And Installation (Battery Tray) >> Removal

Removal And Installation (Battery Tray): Removal

  1. Remove battery. Refer to REMOVAL AND INSTALLATION (BATTERY) .
  2. Remove air duct assembly. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .
  3. Disconnect harness connector from TCM.
  4. Remove wiring harness retainers.
  5. Disconnect harness connectors from ECM.
  6. Remove battery tray.
  7. Remove TCM bracket from battery tray (if necessary).
  8. Remove ECM bracket from battery tray (if necessary).
scientia non olet · About LEMON Manuals