LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Rogue S, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Seat Memory Switch >> Component Function Check

Component Function Check

  1. DATA MONITOR

    G-20 CONSULT

    1. Select "Data Monitor" mode of "AUTO DRIVE POS".
    2. Select "MEMORY SW 1", "MEMORY SW 2", "SET SW".
    3. Check that the function operates normally according to the following conditions:
      Monitor item Condition Status
      MEMORY SW 1 Memory switch 1 Push ON
      Release OFF
      MEMORY SW 2 Memory switch 2 Push ON
      Release OFF
      SET SW Set switch Push ON
      Release OFF

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals