Component Description

No.	Component		Function
1.	ICC steering switch		Refer to ICC STEERING SWITCH
2.	Combination meter		Refer to COMPONENT LOCATION
3.	ABS actuator and electric unit (control unit)	Pump/motor	Refer to ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
		Motor relay
		Actuator relay (main relay)
		ABS IN valve
		ABS OUT valve
		Cut valve 1
		Cut valve 2
		Pressure sensor
4.	ECM		Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication. Accelerator pedal position signal Engine speed signal Mainly receives the following signal from ABS actuator and electric unit (control unit) via CAN communication. Target throttle position signal
5.	TCM		Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication. Shift position signal Current gear position signal
6.	Steering angle sensor		Measures the rotation amount, rotation speed and rotation direction of steering wheel and then transmits the to ADAS control unit via CAN communication.
7.	Lane camera unit		Refer to LANE CAMERA UNIT
8.	ADAS control unit 2		Refer to ADAS CONTROL UNIT
9.	Chassis control module		Refer to ADAS CONTROL UNIT
10.	Warning buzzer		Refer to WARNING BUZZER
11.	ICC sensor		Refer to ICC SENSOR
12.	Stop lamp switch		Refer to BRAKE PEDAL POSITION SWITCH / STOP LAMP SWITCH
13.	Brake pedal position switch		Refer to BRAKE PEDAL POSITION SWITCH / STOP LAMP SWITCH
14.	ADAS control unit		Refer to ADAS CONTROL UNIT