LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2016 >> Rogue S, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Exterior Lighting System (Halogen Headlamp) (DTC/Circuit Diagnosis) >> Circuit Diagnosis >> Hazard Switch >> Component Function Check

Component Function Check

  1. CHECK HAZARD SWITCH SIGNAL BY CONSULT

    G-20 CONSULT DATA MONITOR

    1. Turn ignition switch ON.
    2. Select "HAZARD SW" in "Data Monitor" of "BCM (FLASHER)".
    3. With operating the hazard switch, check the monitor status.
    Monitor item Condition Monitor status
    HAZARD SW Hazard switch ON On
    OFF Off

    Is the inspection result normal?

    YES 

    Hazard switch circuit is normal.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals