Diagnosis Procedure

Check the combination switch. Refer to "SYMPTOM TABLE ".

Is the combination switch normal? 

YES: GO TO 2.

NO: Repair or replace the malfunctioning part.

CONSULT DATA MONITOR

1. Select "HL HI REQ" of IPDM E/R data monitor item.
2. With operating the lighting switch, check the monitor status.

   Monitor item	Condition		Monitor status
   HL HI REQ	Lighting switch (2ND)	HI or PASS	On
   		LO	Off

   Is the item status normal? 

   YES: GO TO 3.

   NO: Replace BCM. Refer to "EXPLODED VIEW ".

Check the headlamp (HI) circuit. Refer to "COMPONENT FUNCTION CHECK ".

Is the headlamp (HI) circuit normal? 

YES: Replace IPDM E/R.

NO: Repair or replace the malfunctioning part.