LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Immobilizer System) >> Symptom Troubleshooting Information >> Symptom Troubleshooting Using the Immobilizer Indicator Lighting Pattern >> Immobilizer indicator does not come on

Immobilizer indicator does not come on

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

If the immobilizer indicator does not come on after turning the ignition switch to ON (II), there is an open or short in the F-CAN lines between the PCM and the gauge control module. Watch the malfunction indicator lamp (MIL). If the MIL stays on, go to PGM-FI system troubleshooting (see GENERAL TROUBLESHOOTING INFORMATION ).

scientia non olet · About LEMON Manuals