Fuel Pump Control Module Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cargo floor lid (see step 1 under TRIM REMOVAL/INSTALLATION - CARGO AREA ).
On models with blind spot information (BSI), remove the BSI unit (see BSI CONTROL UNIT REMOVAL/INSTALLATION ) and/or the active damper control unit (see ACTIVE DAMPER CONTROL UNIT REPLACEMENT ).
Disconnect the fuel pump control module connector (A).

Fig 1: Identifying Fuel Pump Control Module Connector And Bolts
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the fuel pump control module (B).
Install the parts in the reverse order of removal.