LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Driveline/Axle) >> Propeller Shaft Inspection >> Universal Joint and Boots

Universal Joint and Boots

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the shift lever to N.
  2. Raise and support the vehicle (see LIFT AND SUPPORT POINTS ).
  3. Check the center support bearing (A) for excessive play or noise. If the center support has excessive play or noise, replace the propeller shaft  assembly
    Fig 1: Identifying Center Support Bearing
    G08054777Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Check the rubber portion (B) of the center support bearing for damage and deterioration. If the rubber portion is damaged or deteriorated, replace the propeller shaft assembly.
  5. Check the universal joints for excessive play or noise. If the universal joints have excessive play or noise, replace the propeller shaft assembly.
scientia non olet · About LEMON Manuals