LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (SRS (Supplemental Restraint System)) >> Airbag and Tensioner Disposal >> Deploying Airbags In the Vehicle >> Front Passenger's Airbag

Front Passenger's Airbag

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box (see PASSENGER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION ).
  2. Disconnect the dashboard wire harness 4P connector (A) from the front passenger's airbag connector (B).
    Fig 1: Identifying Front Passenger's Airbag & Dashboard Wire Harness 4P Connector
    G00491910Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals