Wireless remote control does not work (all buttons)
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check the wireless remote control battery condition first.
- Make sure that the rear power and rear control are on (refer to the Owner's Manual for more information).
- You need to switch the audio-navigation unit REAR PWR button on for the rear display, remote controls, and sound to operate.
- Check the wireless remote control operation.
Does the wireless remote control operate normally?
YES -Operation is normal at this time.
NO -Go to step 2.
- Substitute a known-good wireless remote control, and recheck.
Does the wireless remote control operate normally?
YES -Replace the original wireless remote control, and recheck.
NO -Go to step 3.
- Check the audio-navigation unit operation.
Does the audio-navigation unit operate normally?
YES -Go to step 4.
NO -Go to audio-navigation unit power switch will not turn on (No information display and no sound) AUDIO-NAVIGATION UNIT POWER SWITCH WILL NOT TURN ON (NO INFORMATION DISPLAY AND NO SOUND) (WITH NAVIGATION) ).
- Check the rear controller display.
Does the display operate normally?
YES -Replace the rear controller and screen
NO -Go to no display appears on the rear controller indicator