Audio disc does not play (without navigation)
WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Check the vehicle battery condition first (see BATTERY TEST ).
- Check the connectors for poor connections or loose terminals.
- Disc labels should not be used in the audio unit. They may jam and damage the player mechanism.
- Turn the ignition switch to ON (II).
- Turn on the audio unit, and try loading a disc.
Does the disc load?
YES -Go to step 3.
NO -Go to AUDIO DISC DOES NOT LOAD
- Insert a known-good disc to see if the symptom can be duplicated.
Does the disc play?
YES -Operation is normal.
NO -Go to step 4.
- Insert audio diagnostic CD (T/N 07AAZ-SDBA100) in the audio unit.
Does the disc play?
YES -The original disc is faulty or has an unreadable format.
NO -Substitute a known-good audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ). If the symptom/indication goes away, replace the original audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).
Special Tools Required
- Diagnostic CD 07AAZ-SDBA100
- Skip Test CD 07AAZ-SDBA200
- Skip Test CD 07AAZ-SDBA300