EGR Pipe Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Remove the EGR pipe mounting bolts (A).

Fig 1: EGR Pipe Mounting Bolts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Raise the vehicle on a lift.
Remove the splash shield (see SPLASH SHIELD REPLACEMENT ).
Remove the EGR pipe mounting nuts (A) and the EGR pipe (B).

Fig 2: EGR Pipe Mounting Nuts With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the parts in the reverse order of removal with new gaskets (C).