LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Exterior Lights) >> High Mount Brake Light Replacement

High Mount Brake Light Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tailgate spoiler trim (see REAR DOOR PROTECTION TAPE REPLACEMENT ).
  2. Remove the two screws from the high mount brake light (A).

    High Mount Brake Light: LED 

    Fig 1: Identifying High Mount Brake Light
    G08055335Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the light in the reverse order of removal.
scientia non olet · About LEMON Manuals