LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Exterior Lights) >> HID Unit Replacement

HID Unit Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Do the battery terminal disconnection procedure (see USING THE GR8 BATTERY DIAGNOSTIC STATION ).
  2. Remove the headlight assembly 
  3. Remove the three mounting screws and the HID unit (A).
    Fig 1: Identifying HID Unit
    G08055319Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Disconnect the 4P connector (B) from the HID unit.
  5. Inspect the gasket for damage. If damaged, replace it.
  6. Install the parts in the reverse order of removal.
  7. Do the battery terminal reconnection procedure (see RECONNECTION ).
scientia non olet · About LEMON Manuals