LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra SE-R >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical (MR20DE) >> Service Information >> Oil Seal >> Removal and Installation of Rear Oil Seal >> Removal

Removal and Installation of Rear Oil Seal: Removal

  1. Remove engine assembly. Refer to "REMOVAL AND INSTALLATION " (M/T models), "REMOVAL AND INSTALLATION " (CVT models).
  2. Remove clutch cover and clutch disc (M/T models). Refer to CLUTCH DISC, CLUTCH COVER AND FLYWHEEL .
  3. Remove drive plate (CVT models) or flywheel (M/T models). Refer to "COMPONENT ".
  4. Remove rear oil seal with a suitable tool.
    CAUTION: Be careful not to damage crankshaft and cylinder block.
scientia non olet · About LEMON Manuals