LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2011 >> Sentra S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical (Qr25DE)) >> Service Information >> Oil Seal >> Removal and Installation of Rear Oil Seal >> Removal

Removal and Installation of Rear Oil Seal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine assembly. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove clutch cover and clutch disc (M/T models). Refer to "EXPLODED VIEW ".
  3. Remove flywheel (M/T models) or drive plate (CVT models). Refer to "DISASSEMBLY AND ASSEMBLY ".
  4. Remove rear oil seal using suitable tool.
    CAUTION: Be careful not to scratch rear oil seal retainer.
    Fig 1: Removing Rear Oil Seal Using Suitable Tool
    G07137525Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals