LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Murano LE >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Transfer Case, Rear Propeller Shaft & Rear Final Drive >> Transfer: TY20A >> Component Diagnosis >> AWD Lock Switch >> Component Function Check

Component Function Check

  1. CHECK AWD LOCK SWITCH OPERATION

    Check that AWD LOCK indicator lamp is in a condition as shown in the following table.

    AWD LOCK INDICATOR LAMP SPECIFICATION

    Condition AWD LOCK indicator lamp
    When the switch is pressed in AWD mode. ON
    When the switch is pressed in 2WD mode. OFF

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals