Removal and Installation: Installation
WARNING: This page is about a different variant/trim than selected.
Note the following, and refer to "EXPLODED VIEW " for installation procedure.
- To fix clutch hose on bracket, position clutch hose clasp on the emboss of bracket and drive lock plate vertically from above.CAUTION:
- Never bend or twist clutch hose.
- Never scratch or damage clutch hose.
- Tighten clutch tube flare nut to the specified torque using a flare nut torque wrench [Commercial service tool].CAUTION: Never damage flare nut and clutch tube.
- Fill clutch fluid. Refer to "REFILLING ".