Clutch Fluid: Refilling
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Keep painted surface on the body or other parts free of clutch fluid. If it spills, wipe up immediately and wash the affected area with water.
- Check that there is no foreign material in reservoir tank and then fill with new clutch fluid.CAUTION: Never reuse drained clutch fluid.
- Loosen air bleeder valve, slowly depress clutch pedal to the full stroke and then release clutch pedal.
- Repeat this operation at intervals of 2 or 3 seconds until new clutch fluid is discharged.
- Tighten air bleeder valve with the clutch pedal depressed.
- Perform the air bleeding. Refer to "AIR BLEEDING PROCEDURE ".