LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Automatic Transaxle) >> DTC U1000 Can Communication Line >> DTC Confirmation Procedure >> Without Consult-II

Without Consult-II

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch "ON".
  2. Wait at least 6 seconds or start engine and wait at least 6 seconds.
  3. Perform self-diagnosis. Refer to "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS) ".
    Fig 1: Self-Diagnosis Procedure (No Tools)
    G02886718Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals