Removal and Installation: Removal
WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery negative terminal.
- Remove windshield wiper and linkage assembly. Refer to "REMOVAL ".
- Drain brake fluid. Refer to "CHANGING BRAKE FLUID ".
- Discharge the A/C refrigerant. Refer to "HFC-134A (R-134A) SERVICE PROCEDURE ".
- Disconnect and remove high-pressure and low-pressure A/C pipes to allow access to ABS actuator and electric unit (control unit). Refer to "COMPONENTS ".
- Disconnect harness connectors from ABS actuator and electric unit (control unit).
- Disconnect brake pipes, noting their location for installation.
- Remove bolts and ABS actuator and electric unit (control unit).