LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 895 (Wiper, Washer & Horn) >> Front Wiper And Washer System >> Wiper Motor and Linkage >> Removal

Wiper Motor and Linkage: Removal

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Operate front wiper motor one full cycle, then turn "OFF" (Auto Stop).
  2. Remove wiper arms from the vehicle. Refer to "FRONT WIPER ARMS ".
  3. Remove the cowl top cover. Refer to "REMOVAL AND INSTALLATION ".
  4. Disconnect wiper motor connector.
  5. Remove bracket and wiper motor assembly.
    Fig 1: Identifying Bracket And Wiper Motor Assembly
    G04918105Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Remove wiper link from wiper frame.
  7. Remove wiper motor from wiper frame.