LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima S, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 834 (Transfer Case) >> ATX14B >> Side Oil Seal >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front propeller shaft. Refer to "REMOVAL ".
  2. Remove the companion flange. Refer to "REMOVAL ".
  3. Remove the transfer control device from the transfer assembly. Refer to "REMOVAL AND INSTALLATION ".
  4. Remove the side oil seal using suitable tool.
    CAUTION: Do not damage shift cross.
    Fig 1: Identifying Side Oil Seal
    G04901596
scientia non olet · About LEMON Manuals